eSun General Purpose LCD 3D Print Resin 500g
Colour: GREY
Esun General Purpose LCD 3D Print Resin is specifically designed for LCD/LED light source printers to achieve better printing quality.
Product Features
General Purpose Resin, Compatible to most LCD printers and DLP with LED UV.
High Hardness 88 shore D, Low Shrinkage
Faster Printing Speed
Low Odor and No Toxic
Resin parameters
Solidify wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C,mPa.s): 100 to 150 mpa.s
Density: 1.07 to 1.12 g / cm3
Shrinkage of Vol.: 3.72%-4.24%
Physical Properties
Flexural strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile strength (Mpa): 35Mpa to 42 Mpa
Elongation at break (%): 11% to 20%
Hardness (D): 88D
Precautions
1. Storage
- Keep away from light and sealed at room temperature.
- It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.
2. Usage
Shake well before use. Avoid any direct sunlight during usage.
Keep it away from the children. Do not put in mouth.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.